Plate heat exchanger includes assembled type, brazing type, "wide
gap" free flow, double wall, more than half and welded, KNN, etc.
Can be widely used in steel, power generation, non-ferrous metals,
oil, chemical, petrochemical, shipbuilding, hvac, refrigeration,
pharmaceutical, dairy, beer, beverage, central heating, etc.
(operating principle):Assemble type plate heat exchanger heat
transfer plate, metal baffle, before and after sealing pads, guide
rod, frame, etc. Adjacent plate and sealing pads in airtight flow
channel, cold and hot fluid under the guidance of gasket separately
from different transfer heat flow through and through the plate,
the effect of heat transfer.
ASME/JIS/American 3A hygiene Standards/
2 Textures of Plate Heat Exchanger:
Gasket Material: chemigum/EPDM/FPM/LDR/asbestos
Frame Materials: carbon steel/all stainless steel
Interface Materials: stainless steel/chemigum
3 Rich plate model: can be divided into more than 60 models.
3.1 Rich plate combination of technology advantage
Can better match the different heat transfer conditions, while for
most of the heat transfer effect and can greatly reduce the cost of
plate heat exchanger, and can get higher velocity between plate,
thereby reducing corrosion and scale formation velocity of the
3.2 Unique plate design
Plate of unique design plate grain can make fluid under low
velocity can produce turbulent, greatly improving the heat transfer
coefficient. Plate mold design more reasonable, form up to
thousands of the contact point between the plate, pressure evenly,
ability of high pressure to 25 kg.
3.3 Advanced triage area
Plate of the triage area design flow guide groove, balance the
distribution of fluid in different flow channel caused by the
difference of flow resistance, to avoid the blind Angle caused by
the uneven flow distribution and flow in the thermal efficiency of
falling, pitting corrosion and fouling in corner, etc.
3.4 Super seal and seal groove
Avoid sticking buckle type gasket, and plate of occlusion and firm,
avoid compressivedisplacement. And set up two between cold and hot
fluid sealing, leakage zone is among, even if a seal is damaged,
the leakage is not make two kinds of fluid mixing, but rather
through orifice flow leakage to the outside world.
3.5 Frame structure of science
Using 5 point positioning suspension system, guarantee the accuracy
of the positioning plate of the up and down or so, and can
guarantee the plate when clamping automatically loc k each other,
so when plate of reset can easily precise alignment, eliminate the
artificial ope ratio n error, so as to ensure the performance of
the heat exchanger after disassembling, th e servic e life of the
gasket is more durable.
Baffle before and after using the numerical control cutting,
molding, and the surface micro forging processing, enhance the
surface strength. Chosen by the unique design of the lock nut and
rolling part, and USES the high strength, high wear resistance,
high anticorrosion materials.